OPTON EDFA 16×32 PORT ( HA5434B-16×32 )


Out of stock

120,000.00 130,000.00

Out of stock

  • Total output power optional 2000-13000mW (33-41dBm)
  • 19″ 2RU rack, Optional Output port up to 128 optional ports.
  • Built-in low noise pre-amplifier, not necessary EDFA cascade,
    extremely lower the CNR, MER degradation of the system
  • Perfect RS232, SNMP
  • Telecom level safety reliability and network management.
  • Simplified machine-room links, improve the system reliability.
  • Simple and reliable in construction/maintenance
  • Dual power supply optional, 1+1 backup
  • Can reduce 95% power consumption
  • The best cost performance in industry.

Erbium-doped fiber amplifier (EDFA) 

Erbium-doped fiber amplifier (EDFA) is an optical repeater device that is used to boost the intensity of optical signals being carried through a fiber optic communications system.A relatively high-powered beam of light is mixed with the input signal using a wavelength selective coupler (WSC). The input signal and the excitation light must be at significantly different wavelengths. The mixed light is guided into a section of fiber with erbium ions included in the core. This high-powered light beam excites the erbium ions to their higher-energy state. When the photons belonging to the signal at a different wavelength from the pump light meet the excited erbium atoms, the erbium atoms give up some of their energy to the signal and return to their lower-energy state. A significant point is that the erbium gives up its energy in the form of additional photons which are exactly in the same phase and direction as the signal being amplified. So the signal is amplified along its direction of travel only. This is not unusual – when an atom “lases” it always gives up its energy in the same direction and phase as the incoming light. Thus all of the additional signal power is guided in the same fiber mode as the incoming signal. There is usually an isolator placed at the output to prevent reflections returning from the attached fiber. Such reflections disrupt amplifier operation and in the extreme case can cause the amplifier to become a laser. The erbium doped amplifier is a high gain amplifier.

You can click here for more CATV products

Weight 15 kg

Based on 0 reviews

0.0 overall

Be the first to review “OPTON EDFA 16×32 PORT ( HA5434B-16×32 )”

There are no reviews yet.

Open chat
How can i help you?